The New Yankee Workshop

Episode 2

Workbench

A good workshop begins with a well-equipped workbench, and master woodworker Norm uses one from his own shop as a model for the conveniently-sized and affordable workbench he builds in this episode. After a look at a workbench used 100 years ago by the craftsmen at Hancock Shaker Village in western Massachusetts, Norm builds a workbench featuring an oak-edged hardwood top, a bench vice, a recessed tool storage area on top and a shelf beneath.

Episode 3

Drop Leaf Table

Norm uses ash, a durable hardwood, to fashion a drop-leaf table featuring turned legs, a top and leaves made from glued up stock. Norm shows how to turn the table legs on a duplicating lathe and reveals a few tricks for making mortise and tenons joints. Using a router and two special bits, he shows how the drop-leaf joint is made.

Episode 4

Blanket Chest

Norm travels to the island of Nantucket off the Massachusetts coast to look at a handmade blanket chest in a sea captain's house dating from 1790. Incorporating elements of this antique in his own design, Norm builds a blanket chest of pine, lined with aromatic cedar panels.

Episode 5

Bedside Table

Norm constructs a bedside table inspired by one found at the Hancock Shaker Village in western Massachusetts. Norm's design, made from pine, features a shallow drawer, table legs tapered on the inner sides and a table top with a breadboard design (glued boards edged with wood on two ends).

Episode 6

Oak Bathroom Vanity

Norm demonstrates how to build a bathroom vanity with dovetailed joints. He uses oak and a laminate top with double doors and a flat panel outside and raised panel inside mimicking the Shaker style. The vanity dimensions are 34" high x 38" wide x 23" deep. Inspired by a dry sink he found at a 1790 Shaker house in Harvard, Norm's oak unit features dovetailed joints and a high-pressure laminate top.

Episode 7

Trestle Table

After a look at a pine trestle table in a Shaker house on the island of Nantucket off the Massachusetts coast, Norm constructs his own easily-disassembled trestle table of cherry, a hardwood which, if kiln-dried, resists twisting or shrinking over time. Norm shows how to glue up the boards that comprise the expansive table top and demonstrates how to make the two trestles and the stretcher which connects them.

Episode 8

Bookcase

Norm builds a free standing bookcase with a cornice detail, adjustable shelves, and a removable base. He uses pine for the base and birch plywood for the rest. The bookcase dimensions are 80" high x 36" wide x 12 1/2" deep.

Episode 9

Chest of Drawers

Norm demonstrates how to build a chest of drawers using Ponderosa pine. He cuts and planes the wood, glues the boards fro the top and sides. He also illustrates how to build the drawers including the drawer case, the frames, and the base. The chest measures 42" high x 41 1/2" wide x 19" deep. Norm makes his own design from Ponderosa pine, showing how to cut and plane the wood, glue the boards and build the drawers, frame and base.

Episode 10

Candle Stand

Norm travels to the Hancock Shaker Village in western Massachusetts to gather ideas for his own design for a candle stand. Returning to his workshop, Norm shows home woodworkers how to build an exact replica using power tools, including a lathe, router and band saw.

Episode 11

Hutch

Norm demonstrates how to build a hutch using knotty pine. The hutch consists of a base cabinet that has raised panel doors and an open shelf section. It measures 81 1/2" high x 56" wide x 18" deep. In the kitchen of the Fitch house at Old Stourbridge, Norm shows us an early American `hutch' then builds his own pine version back at the workshop.

Episode 12

Writing Desk

Norm builds a writing desk with a slanted top that is constructed mostly of maple. The desk features a shallow drawer, a nest of small drawers, and a open bins in the top. The dimensions are 42" high x 36" wide x 20" deep. Made mostly of maple, this desk is one of the more complicated projects ever tackled by Norm.

Episode 13

Corner Cupboard

Norm constructs a corner cupboard of pine and plywood. His design employees a top section that is enclosed by glass paned doors and a base cabinet with raised panel doors. The cupboard dimensions are 86 1/2" high x 42" wide x 30" deep. Norm makes his own corner cupboard from pine and plywood, incorporating a top section with glass doors and a base cabinet with raised panel doors.